C
HAPTER
18
| Multicast Filtering
Layer 2 IGMP (Snooping and Query)
– 451 –
Figure 274: Showing Static Interfaces Assigned to a Multicast Service
To show the all interfaces statically or dynamically assigned to a multicast
service:
1. Click Multicast, IGMP Snooping, Multicast Router.
2. Select Current Member from the Action list.
3. Select the VLAN for which to display this information.
Figure 275: Showing Current Interfaces Assigned to a Multicast Service
SETTING IGMP
S
NOOPING STATUS
PER INTERFACE
Use the Multicast > IGMP Snooping > Interface (Configure) page to
configure IGMP snooping attributes for a VLAN interface. To configure
snooping globally, refer to "Configuring IGMP Snooping and Query
Parameters" on page 444.
CLI REFERENCES
â—† "IGMP Snooping" on page 849
To Next Page
Loading...
Need help?
General