C
HAPTER
16
| IP Configuration
Setting the Switch’s IP Address (IP Version 6)
– 431 –
Figure 258: Showing IPv6 Statistics (UDP)
SHOWING THE MTU
FOR RESPONDING
DESTINATIONS
Use the IP > IPv6 Configuration (Show MTU) page to display the maximum
transmission unit (MTU) cache for destinations that have returned an ICMP
packet-too-big message along with an acceptable MTU to this switch.
CLI REFERENCES
◆ "show ipv6 mtu" on page 936
PARAMETERS
These parameters are displayed:
Table 31: Show MTU - display description
Field Description
MTU Adjusted MTU contained in the ICMP packet-too-big message returned from
this destination, and now used for all traffic sent along this path.
Since Time since an ICMP packet-too-big message was received from this
destination.
Destination
Address
Address which sent an ICMP packet-too-big message.
To Next Page
Loading...
