C
HAPTER
21
| System Management Commands
System Status
– 507 –
RELATED COMMANDS
show running-config (505)
show system This command displays system information.
DEFAULT SETTING
None
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
◆ For a description of the items shown by this command, refer to
"Displaying System Information" on page 89.
◆ The POST results should all display “PASS.” If any POST test indicates
“FAIL,” contact your distributor for assistance.
EXAMPLE
Console#show system
System Description : ES3510MA
System OID String : 1.3.6.1.4.1.259.8.1.11
System Information
System Up Time : 0 days, 7 hours, 20 minutes, and 43.30 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 00-E0-0C-00-00-FD
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled
Console#
show users Shows all active console and Telnet sessions, including user name, idle
time, and IP address of Telnet client.
DEFAULT SETTING
None
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
The session used to execute this command is indicated by a “*” symbol
next to the Line (i.e., session) index number.
To Next Page
Loading...
Need help?
General