C
HAPTER
18
| Multicast Filtering
Multicast VLAN Registration
– 470 –
DISPLAYING MVR
RECEIVER GROUPS
Use the Multicast > MVR (Show Member) page to display the interfaces
assigned to the MVR receiver groups.
CLI REFERENCES
â—† "show mvr" on page 880
PARAMETERS
These parameters are displayed:
◆ Group IP Address – Multicast groups assigned to the MVR VLAN.
◆ Source IP Address – Indicates the source address of the multicast
service, or displays an asterisk if the group address has been statically
assigned.
◆ VLAN – Indicates the MVR VLAN receiving the multicast service.
◆ Forwarding Port – Shows the interfaces with subscribers for multicast
services provided through the MVR VLAN. Also shows the VLAN through
which the service is received. Note that this may be different from the
MVR VLAN if the group address has been statically assigned.
WEB INTERFACE
To display the interfaces assigned to the MVR receiver groups:
1. Click Multicast, MVR.
2. Select Show Member from the Step list.
Figure 290: Displaying MVR Receiver Groups
To Next Page
Loading...
Need help?
General