Edge-Core ES3510MA User Manual

– 883 –
38 LLDP COMMANDS
Link Layer Discovery Protocol (LLDP) is used to discover basic information
about neighboring devices on the local broadcast domain. LLDP is a Layer 2
protocol that uses periodic broadcasts to advertise information about the
sending device. Advertised information is represented in Type Length Value
(TLV) format according to the IEEE 802.1ab standard, and can include
details such as device identification, capabilities and configuration settings.
LLDP also defines how to store and maintain information gathered about
the neighboring network nodes it discovers.
Table 129: LLDP Commands
Command Function Mode
lldp Enables LLDP globally on the switch GC
lldp holdtime-multiplier Configures the time-to-live (TTL) value sent in
LLDP advertisements
GC
lldp notification-
interval
Configures the allowed interval for sending
SNMP notifications about LLDP changes
GC
lldp refresh-interval Configures the periodic transmit interval for
LLDP advertisements
GC
lldp reinit-delay Configures the delay before attempting to re-
initialize after LLDP ports are disabled or the link
goes down
GC
lldp tx-delay Configures a delay between the successive
transmission of advertisements initiated by a
change in local LLDP MIB variables
GC
lldp admin-status Enables LLDP transmit, receive, or transmit and
receive mode on the specified port
IC
lldp basic-tlv
management-ip-
address
Configures an LLDP-enabled port to advertise
the management address for this device
IC
lldp basic-tlv port-
description
Configures an LLDP-enabled port to advertise its
port description
IC
lldp basic-tlv system-
capabilities
Configures an LLDP-enabled port to advertise its
system capabilities
IC
lldp basic-tlv system-
description
Configures an LLDP-enabled port to advertise
the system description
IC
lldp basic-tlv system-
name
Configures an LLDP-enabled port to advertise its
system name
IC
lldp dot1-tlv proto-
ident
*
Configures an LLDP-enabled port to advertise
the supported protocols
IC
lldp dot1-tlv proto-vid
*
Configures an LLDP-enabled port to advertise
port related VLAN information
IC
lldp dot1-tlv pvid
*
Configures an LLDP-enabled port to advertise its
default VLAN ID
IC
lldp dot1-tlv vlan-
name
*
Configures an LLDP-enabled port to advertise its
VLAN name
IC

Edge-Core ES3510MA Specifications

General

Brand	Edge-Core
Model	ES3510MA
Category	Switch
Language	English