C
HAPTER
37
| Multicast Filtering Commands
Multicast VLAN Registration
– 881 –
The following displays information about the interfaces attached to the
MVR VLAN:
Console#show mvr interface
Port Type Status Immediate Static Group Address
-------- -------- ------------- --------- --------------------
Eth1/ 2 Source Active/Up
Eth1/ 3 Source Inactive/Down
Eth1/ 1 Receiver Active/Up Disabled 225.0.0.1(VLAN1)
225.0.0.9(VLAN3)
Eth1/ 4 Receiver Active/Down Disabled
Console#
The following shows information about the interfaces associated with
multicast groups assigned to the MVR VLAN:
Console#show mvr members
MVR Forwarding Entry Count:1
Group Address Source Address VLAN Forwarding Port
------------- -------------- ---- --------------
225.0.0.9 * 2 Eth1/ 1(VLAN3) Eth1/ 2(VLAN2)
Console#
MVR Group Address A multicast service sent to all attached subscribers
MVR Group Count The number of contiguous MVR group addresses.
Table 127: show mvr interface - display description
Field Description
Port Shows interfaces attached to the MVR.
Type Shows the MVR port type.
Status Shows the MVR status and interface status. MVR status for source
ports is “ACTIVE” if MVR is globally enabled on the switch. MVR
status for receiver ports is “ACTIVE” only if there are subscribers
receiving multicast traffic from one of the MVR groups, or a
multicast group has been statically assigned to an interface.
Immediate Leave Shows if immediate leave is enabled or disabled.
Static Group Address Shows any static MVR group assigned to an interface, and the
receiver VLAN.
Table 128: show mvr members - display description
Field Description
MVR Forwarding Entry
Count
The number of multicast services currently being forwarded from
the MVR VLAN.
Group Address Multicast groups assigned to the MVR VLAN.
Table 126: show mvr - display description (Continued)
Field Description
To Next Page
Loading...
Need help?
General