266 Faxing (Fax Model Only)
Follow the steps below to change the report settings.
1. Press the Setup button on the control panel.
The Setup light is lit and the Setup menu appears in the LCD
panel.
2. Press the d Down button twice to select Fax Settings, then
press the r Right button.
The Fax Settings menu appears.
3. Press the u Up or d Down button several times until
Communication Setup appears, then press the r Right button.
The Communication Setup menu appears.
4. Press the u Up or d Down button to select your desired
report, then press the r Right button.
5. Press the u Up or d Down button to select your desired
setting item, then press the r Right button.
6. To exit the settings, press the l Left button several times or
press another mode’s button.
Multiple Trans
Report
This report contains transmission information for multiple
transmissions. You can specify when printing this report.
On Prints this report automatically each
time multiple fax transmission using
group dial occurs.
Error Only Prints this report automatically only
when an error occurs.
Off Does not print this report.
Type of report Description and setting items
To Next Page
Loading...
Need help?
General
