358
4. Attach the protective materials onto the product, then repack
the product in its original box.
c
Caution:
After transporting the product, set the transportation lock on the
left side of the document table in the unlocked position before
using the product. See “Scanner parts” on page 26.
For short distances
Always pay attention to the following handling precautions when
you need to move the product for short distances.
If you are moving the product on its own, two people should lift
and carry the product.
Follow the steps below to move the product for short distances.
a. installed option (only when the optional paper cassette
unit is installed)
b. photoconductor unit
c. loaded paper
d. interface cable
e. power cord
To Next Page
Loading...
Need help?
General
