Printing Problems 403
13
13
13
13
13
13
13
13
13
13
13
13
Toner smudges
The gradation setting is too
small when printing graphics.
On the Basic Setting menu in the printer
driver, click More Settings, adjust the
gradation setting by sliding the
Contrast slider bar.
There may be no toner left in
the toner cartridge.
If the message in the LCD panel or in
EPSON Status Monitor 3 indicates that
the amount of toner is low, replace the
toner cartridge. See “Toner Cartridge”
on page 338. You can also check the
remaining toner with the following
symbols on the Basic Settings tab in the
printer driver.
Toner low: !
Toner end: ×
There may be a problem with
the photoconductor unit.
Replace the photoconductor unit. See
“Photoconductor Unit” on page 342.
The print head is dirty. See “Cleaning the print head” on page
352 and clean the print head.
Cause What to do
Your paper may be moist or
damp.
Do not store your paper in a humid or
damp environment.
You may not be using the
correct type of paper for your
product.
Epson special paper or smooth,
high-quality copier paper is
recommended for best results. See
“Available paper types” on page 442 for
information on choosing paper.
Cause What to do
To Next Page
Loading...
Need help?
General
