Scanning 213
6
6
6
6
6
6
6
6
6
6
6
6
5. Click Test to check the connection. If everything works
properly, this is indicated by a message appearing under
Scanner Status in the dialog box.
6. Click OK to save the settings, and then close the dialog box.
Scanning an image
Network scanning requires that all of the devices (this product,
the optional EPSON Network Image Express Card, and the client
computer) are turned on. Also, make sure EPSON Scan is running.
There are several methods you can use to scan a document.
❏ Click the Scan button in the EPSON Scan main window on
the client computer
Start EPSON Scan on the client computer. Make any desired
settings, and then click the Scan button to start scanning.
❏ Use the x B&W Start or x Color Start button on the product
Start EPSON Scan on the client computer, and then click the
x B&W Start or x Color Start button on the product.
Note:
In a network environment, the x B&W Start or x Color Start button
on the product works in the same way as clicking the Scan button in
the EPSON Scan main window.
To Next Page
Loading...
Need help?
General
