Using the Control Panel 321
9
9
9
9
9
9
9
9
9
9
9
9
PC connection failed
Unable to normally connect to a computer via USB interface in
Scan mode. The product is not connected with the computer or
Event Manager is not installed on the computer.
Release Carriage Lock
An error occurred when you set the transportation lock to the
locked position. To clear the error message on the LCD panel, set
the transportation lock to the unlocked position, and then turn
on the product again or press the x B&W Start or x Color Start
button to restart the scanning job.
Scanner Cover Open
The ADF cover is opened.
Scanner error
An error occurred in the scanner unit. Turn off the product, and
then turn it on again several minutes later. If the error occurs
again, contact your dealer or a qualified customer support person
for assistance.
Fax error messages
Cannot Fax cause of Power Off Report
An error occurs if you perform fax transmission when a power
off report cannot be printed after turning on the product.
Cannot Send when Receiving
An error occurs when you perform fax transmission while
receiving a fax.
To Next Page
Loading...
Need help?
General
