284 Using the Control Panel
❏ You cannot switch between modes in the following cases.
- When an error has occurred on the whole system such as a service
call error or a system error.
- When a job is being processed in any of the modes.
Mode Menus
You can use your desired mode according to your job purpose.
To access your desired mode, press the corresponding mode
button on the control panel.
Print mode
The default mode of this product is Print mode. While the product
is in Print mode, the Print light (green) is lit and the following
screen appears.
Note:
During the printing process, you cannot access other modes.
To Next Page
Loading...
