Notices 479
D
D
D
D
D
D
D
D
D
D
D
D
Notice for EPSON AcuLaser CX11NF or EPSON
AcuLaser CX11F Users
Sending Faxes by Dialing from a Telephone
The procedure to send faxes by dialing from a telephone is explained
in this product’s documentation. However, sending faxes by dialing
from a telephone is not supported by this product.
Receiving Faxes When You Hear Fax Tones
Before receiving faxes when you hear the fax tones, make sure that the
product is in the Fax mode. If not, press the Fax button to enter the
Fax mode.
Receiving Faxes Using Fax Polling
Follow the steps below to receive faxes using fax polling. This function
is used to have information stored in the other party's fax machine sent
to your product.
1. Make sure that the product is in the Fax mode. If not, press the
Fax button to enter the Fax mode.
2. Enter the other party's fax number using the numeric keypad.
3. Press the u Up or d Down button several times until Polling Rcptn
appears, then press the l Left or r Right button to select On.
4. Press the x B&W Start or x Color Start button to start the
transmission.
To Next Page
Loading...
Need help?
General
