404 Printing Problems
Areas are missing in the printed image
The paper path inside the
product may be dusty.
Clean internal product components by
printing three pages with only one
character per page.
There may be a problem with
the photoconductor unit.
Replace the photoconductor unit. See
“Photoconductor Unit” on page 342.
Cause What to do
Your paper may be moist or
damp.
This product is sensitive to moisture
absorbed by the paper. The higher the
moisture content in the paper, the lighter
the printout. Do not store paper in a
humid or damp environment.
You may not be using the
correct type of paper for your
product.
If the surface of your paper is too rough,
printed characters may appear distorted
or broken. Epson special paper or
smooth, high-quality copier paper is
recommended for best results. See
“Available paper types” on page 442 for
information on choosing paper.
Cause What to do
To Next Page
Loading...
Need help?
General
