Using the Control Panel 309
9
9
9
9
9
9
9
9
9
9
9
9
Status and Error Messages
This section contains a list of error messages shown in the LCD
panel. They give a brief description of each message and
suggestions for correcting the problem. Note that not every
message shown in the LCD panel indicates a problem. When the
mark is displayed at the left of the warning message, multiple
warnings have occurred.
Printer error messages
Calibrating Printer
The product automatically calibrates itself. This is not an error
message, and will clear itself after about one minute or more
depending on the status of the product. While the product
displays this message, do not open the covers or turn off the
product.
Cancel All Print Job
The product is canceling all print jobs in the product memory,
including jobs the product is currently receiving or printing. This
message appears when the y Cancel button has been pressed
down for more than three seconds.
Cancel Print Job
The product is canceling the current print job. This message
appears when the y Cancel button has been pressed and
released within three seconds.
Can’t Print
The print data is deleted because it is incorrect.
Make sure that the appropriate printer driver is being used.
To Next Page
Loading...
Need help?
General
