Epson AcuLaser CX11 - Chapter 9 Using the Control Panel; Selecting a Mode

Using the Control Panel 283
9
9
9
9
9
9
9
9
9
9
9
9
Chapter 9
Using the Control Panel
Selecting a Mode
You can use this product as a printer, copier, fax, and scanner.
When the product is turned on, it enters the Print mode
automatically. When using one of these functions, select your
desired function by pressing the corresponding mode button on
the control panel. Each mode’s main screen appears in the LCD
panel as you select the mode.
There are three mode buttons on the control panel that allow you
to switch between the four modes: Print mode (default mode),
Copy mode, Fax mode, and Scan mode. In addition, you can also
use the Setup button for making various settings for this
product. For details on the Setup menu, see “Using the Setup
Menu” on page 288.
Note:
❏ If no button is pressed for more than 3 minutes, any changes made
are canceled and the mode returns to the Print mode.
❏ If you press a mode button while the product is in that mode, e.g.,
pressing the Fax button in Fax mode, the mode returns to the
Print mode.