296 Using the Control Panel
Reset Menu
This menu allows you to cancel printing and reset the printer
settings.
Clear Warning
Clears a warning message that shows an error except for those
that occur from consumable products or mandatory-replacement
parts.
Clear All Warnings
Clears all warning messages that appear in the LCD panel.
Reset
Stops printing and clears the current job received from the active
interface. You may want to reset the product when there is a
problem with the print job itself and the product cannot print
successfully.
Reset All
Stops printing, clears the printer memory, and restores the printer
settings to their default values. The print jobs received from all
interfaces are erased.
Note:
Performing Reset All clears print jobs received from all interfaces. Be
careful not to interrupt someone else’s job.
Selectype Init
Restores the control panel menu settings to their default values.
Change toner C/M/Y/K
Replace the indicated toner cartridge. See “Toner Cartridge” on
page 338 for details.
To Next Page
Loading...
Need help?
General
