Other Problems 385
12
12
12
12
12
12
12
12
12
12
12
12
Paper does not feed from the optional paper
cassette
Feed jam when using the optional paper
cassette
Cause What to do
The optional paper cassette
may not be installed properly.
See “Optional Paper Cassette Unit” on
page 325 for instructions on installing an
optional paper cassette unit.
The paper source setting may
not be correct.
Make sure you have selected the proper
paper source in your application.
There may be no paper in the
paper cassette.
Load paper into the selected paper
source.
Too many sheets may be
loaded in the paper cassette.
Make sure that you have not tried to load
too many sheets of paper into the
cassette. The cassette can hold a
maximum of 500 sheets of 64 to 105 g/m²
paper.
The paper size is not set
correctly.
Make sure that the correct paper size is
selected in the Tray Menu on the control
panel.
Cause What to do
The paper is jammed at the
optional paper cassette.
See “Clearing Jammed Paper” on page
363 to clear jammed paper.
To Next Page
Loading...
Need help?
General
