234 Copying
Note:
❏ Do not turn off the power or press another mode’s button while
copying is in progress, as copying may be performed incorrectly.
❏ When you place multiple documents in the Auto Document
Feeder and make a continuous high quality (600 dpi) color copy
with the default memory (128 MB), the product may not work
properly because of insufficient memory. We recommend
adding an memory module so that the total memory size is 256
MB or higher.
Canceling Copying
When the y Cancel button on the control panel is pressed while
a document is being copied in copy mode, the LCD panel shows
Cancel Print Job and the copy job is canceled.
Making Changes to Copy Settings
When you plan to copy your document using other than the
default settings, you can make changes to the appropriate copy
settings as follows. Use the u Up or d Down button to move
between menu items.
Changing the number of copies
You can specify the number of copies by selecting a value from 1
to 99. The default setting is 1.
1. Make sure that the product is in Copy mode. If not, press the
Copy button to enter the Copy mode.
To Next Page
Loading...
Need help?
General
