Epson AcuLaser CX11 - Images Cannot be Located Properly in the Thumbnail; Preview; The Scanned Image Differs from the Original

420 Scanning Problems
Images cannot be located properly in the
Thumbnail preview.
Try one or more of the following solutions.
❏ In the Preview window, create marquees on the area you want
to scan, and then scan.
❏ In the Configuration dialog box, adjust the thumbnail
cropping area using the Thumbnail Cropping Area slider.
The scanned image differs from the original.
Try one or more of the following solutions.
❏ Check if the original is one of the following available
document types.
- Color or black-and-white photo
- Illustration
- Text/line art
- Color or black-and-white document
❏ Make sure that the image to be scanned is not extremely bright
or dark, or under exposed or over exposed.
❏ Specify the paper size in Manual Scan, or specify the detail
settings for the image to be scanned in the Home Mode or
Professional Mode using EPSON Scan on your computer.