Epson AcuLaser CX11 - Changing Incoming Faxes Settings

Faxing (Fax Model Only) 263
8
8
8
8
8
8
8
8
8
8
8
8
2. Press the d Down button twice to select Fax Settings, then
press the r Right button.
The Fax Settings menu appears.
3. Press the d Down button to select Transmission Settings,
then press the r Right button.
4. Press the d Down button to select Print Sender Info, then
press the r Right button.
5. Press the u Up or d Down button to select On, then press the
r Right button.
6. To exit the settings, press the l Left button several times or
another mode’s button.
Changing incoming faxes settings
You can set the following items for receiving faxes in Reception
Settings.
1. Press the Setup button on the control panel.
The Setup light is lit and the Setup menu appears in the LCD
panel.
2. Press the d Down button twice to select Fax Settings, then
press the r Right button.
Reception Settings menu Setting items
Paper Cassette Auto, MP, LC
Incoming Mode Auto switching, Fax only, Phone only,
TAM
Attached Phone Timeout 1 to 99
DRPD On, Off