Epson AcuLaser CX11 - Fax Mode (Fax Model Only)

286 Using the Control Panel
Fax mode (fax model only)
To use the fax function, press the Fax button on the control
panel to enter the Fax mode. While the product is in Fax mode,
the following screen appears.
Note:
❏ If no button is pressed for more than 3 minutes, any changes made
are canceled and the mode returns to the Print mode.
❏ If you press the Fax button while in Fax mode, the screen returns
to the Print mode.
❏ Even in Fax mode, TWAIN scan (only when the scanner is not
operating) and printing using the host interface are available.