384 Other Problems
Problems Using Options
To confirm your options are installed correctly, print a status
sheet. See “Printing a Status Sheet” on page 393 for details.
There may be no paper in the
cassettes.
Load paper into the selected paper
source.
The size of loaded paper
differs from the control panel
setting.
Make sure that the correct paper size is
set in MP Tray Size or LC1 Size settings
in the Tray Menu in the Setup menu’s
Printer Settings.
Too many sheets may be
loaded in the MP tray or paper
cassettes.
Make sure that you have not tried to load
too many sheets of paper. For the
maximum paper capacity for each paper
source, see “Loading Paper” on page 40.
The paper that is loaded is
curled.
Straighten the paper.
If paper does not feed from the
optional paper cassette unit,
the unit may not be installed
properly.
For instructions on installing the unit,
see “Optional Paper Cassette Unit” on
page 325.
Cause What to do
To Next Page
Loading...
Need help?
General
