Epson AcuLaser CX11 - Ethernet Interface

Technical Specifications 453
B
B
B
B
B
B
B
B
B
B
B
B
❏ Since USB 2.0 is fully compatible with USB 1.1, USB 1.1 can be
used as an interface.
❏ USB 2.0 can be used with Windows XP, 2000, and Server 2003
operating systems. If your operating system is Windows Me or 98,
use a USB 1.1 interface.
Ethernet interface
You can use an IEEE 802.3 100BASE-TX/10 BASE-T
straight-through shielded, twisted-pair interface cable with an
RJ45 connector.
Note:
❏ NetWare queue-based printing is not supported.
❏ Ethernet Interface may not be available depending on the product
model.