330 Installing Options
7. Reconnect the interface cable and power cord, then turn the
product on.
8. To confirm that the option is installed correctly, print a Status
Sheet. See “Printing a Status Sheet” on page 393.
Note for Macintosh users:
When you have attached or removed product options, you need to
delete the product using Print Setup Utility (for Mac OS X 10.3)
or Print Center (for Mac OS X 10.2 or below), and then re-register
the product.
Removing the optional paper cassette unit
Perform the installation procedure in reverse.
To Next Page
Loading...
Need help?
General
