Maintenance and Transportation 343
11
11
11
11
11
11
11
11
11
11
11
11
❏ Be careful not to scratch the surface of the drum and belt. Also,
avoid touching the drum, since oil from your skin may
permanently damage its surface and affect print quality.
❏ To get the best print quality, do not store the photoconductor
unit in an area subject to direct sunlight, dust, salty air, or
corrosive gases (such as ammonia). Avoid locations subject to
extreme or rapid changes in temperature or humidity.
❏ Do not tilt the photoconductor unit.
w
Warning:
❏ Do not touch the lever under the scanner unit when you open
or close the unit. Touching it will cause the document cover
of the scanner unit to fall down, which may damage the
product and cause injury.
❏ Do not dispose of the used consumable products in fire, as
they may explode and cause injury. Dispose of them
according to local regulations.
❏ Keep consumable products out of the reach of children.
Replacing the photoconductor unit
Follow the steps below to replace the photoconductor unit.
To Next Page
Loading...
Need help?
General
