Epson AcuLaser CX11 - Memory Module; Installing a Memory Module

Installing Options 331
10
10
10
10
10
10
10
10
10
10
10
10
Memory Module
By installing a Dual In-line Memory Module (DIMM), you can
increase product memory up to 576 MB. You may need to add
expansion memory if you are having difficulty printing complex
graphics.
Note:
This product has three memory slots, of which two have 128 MB DIMMs
(64 MB each) already installed at the time of manufacture.
Installing a memory module
Follow the steps below to install an optional memory module.
w
Warning:
Be careful when working inside the product as some components
are sharp and may cause injury.
c
Caution:
Before you install a memory module, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
1. Turn the product off and unplug the power cord and interface
cable.