268 Faxing (Fax Model Only)
Registering Recipients
When sending faxes using the speed dial or one-touch dial
function, you need to register the recipient information in
advance. You can register recipients either from EPSON Speed
Dial Utility or the Setup menu on the control panel.
c
Caution:
While using a fax function such as sending/receiving fax or
making fax settings in Setup mode, do not use EPSON Speed
Dial Utility to change a recipient.
Note:
❏ When registering multiple recipient fax numbers on the product as
a group, only EPSON Speed Dial Utility is available. For details,
see online help.
❏ Registering a recipient name is only available using EPSON Speed
Dial Utility. For details, see online help.
Using the EPSON Speed Dial Utility (for Windows
only)
Installing EPSON Speed Dial Utility
Note:
For Windows 2000 and XP, you need the administrative privileges to
install the software.
Follow the steps below to install EPSON Speed Dial Utility.
1. Make sure that the product is off and Windows is running on
your computer.
2. Insert the software CD in the CD-ROM drive.
To Next Page
Loading...
Need help?
General
