Scanning Problems 419
14
14
14
14
14
14
14
14
14
14
14
14
Colors differ from the original.
Try one or more of the following solutions.
❏ Change the Image Type setting.
❏ Change the image settings of your scanner software,
especially the data format (bits, pixel and color), gamma
correction, and color correction. Try different combinations
of these settings.
❏ Change the Display Gamma setting of scanned image for your
output device, such as a monitor or the product, in the
Configuration dialog box.
❏ Select Color Control and check Continuous auto exposure
in the Configuration dialog box. Or, adjust the Exposure
setting using the Auto Exposure button in the
Professional Mode main window.
❏ Check the color matching and color management capabilities
of your computer, display adapter, and software. Some
computers can change the color palette to adjust the colors on
your screen. See your software and hardware manuals for
details.
❏ Use the color management system for your computer: ICM
for Windows, or ColorSync for Macintosh. For Windows, add
a color profile that matches your monitor.
❏ Exact color matching is very difficult. Check your software
and monitor documentation for information on color
matching and calibration.
❏ Printed colors do not exactly match the colors on your
monitor, since products and monitors use different color
systems: the monitors use RGB (red, green, and blue), while
products typically use CMYK (cyan, magenta, yellow, and
black).
To Next Page
Loading...
Need help?
General
