322 Using the Control Panel
Fax Communication Error
A fax communication error occurred during transmission due to
some cause.
Fax Error
An error occurred in the fax unit. Turn off the product, wait
several minutes and then turn it on again. If the error occurs again,
contact your dealer or a qualified customer support person for
assistance.
Insufficient memory
Unable to perform fax transmissions or receptions due to
insufficient memory in the product. Wait until the fax jobs stored
in the memory are finished, and then try transmission/reception
again.
No Report Print Info.
This message appears when you specify printing a report or list
that does not exist in the Printing Report menu in Fax mode.
Please Wait
This message appears until a carriage lock is completed.
Send failed
Unable to perform fax transmissions. This message appears when
you send a fax manually or a color fax transmission fails. When
sending a fax using the memory transmission function, the
message does not appear.
Set Document to ADF
This message appears when you set a legal size document on the
document table for fax transmission. Legal size documents can
only be used in the Auto Document Feeder.
To Next Page
Loading...
Need help?
General
