h
Select the Network Projection menu and press [Enter].
i
Turn on the P
ro
jector Keyword setting if you want to prevent access to
the projector by anyone not in the room with it.
When you turn on this setting, you must enter a displayed,
randomize
d keyword from a computer using Epson iProjection to
access the projector and share the current screen.
j
Set the E
pson iProjection setting to On.
k
Select the options as necessary.
•
Displ
ay LAN Info. lets you set the display format for the projector's
network information.
•
Moderator Password lets you enter a four-digit number password for
accessing the projector as a moderator using Epson iProjection. (No
password is set by default.)
•
Keyword Interrupt Display lets you select whether to display a
projector keyword on the projected image when accessing the projector
using Epson iProjection.
l
When you nish
selecting settings, go back to the Network Settings
screen, select Set, and follow the on-screen instructions to save your
settings and exit the menus.
If no Web Control Password has been set, a screen prompting
yo
u to set a password is displayed before you can save the settings.
Follow the on-screen instructions to set the password.
Wired Network Projection
139
To Next Page
Loading...
