Epson EB-810E - Page 144

a
Press the [Menu] button, select the Manageme
nt menu, and press [Enter].
b
Set the Wireless LAN Power setting to On.
c
Select the Network menu and press [Enter].
d
Select Network Settings and press [Enter].
e
To identify the projector over the network, select Pro
jector Name and
enter a name up to 16 alphanumeric characters long.
f
Set the Priority Control Interface setting to Wireless LAN.
g
Se
lect the connection method.
•
For sim
ple AP mode, set the Simple AP setting to On and go to step 12.
You must set the Passp
hrase when using simple AP mode
for the rst time. Follow the on-screen instructions to set the
passphrase.
Wireless Network Projection
144