Setting Options Description
Power On Trigger Plug-in Detection
Sign
al Detection
Sets the way the projector turns on when
Auto Power On is set to HDMI1.
Plug-in Detection: Automatically turns
on the projector when it detects that a
connected device has been turned on.
Signal Detection: Automatically turns on
the projector when it detects an HDMI
video signal.
When set to Signal Detection, the
standby power increases. Please consider
the environment before making any
changes.
Sleep Mode On
O
Set to On to automatically turns o the
pr
ojector aer an interval of inactivity.
Sleep Mode Timer 1 to 30 minutes Sets the interval for Sle
ep Mode.
A/V Mute Timer On
O
Turns o the projector automatically if
A/V Mu
te is enabled and 30 minutes of
inactivity has passed.
Setting Options Description
Standby Mode Communication
On
Comm
unication
O
Set to Communication On to allow
monitoring and controlling the projector
over a network when the projector is in
standby mode.
Setting is only displayed in the following
cases:
•
Auto Power On is not set to HDMI1
and Power On Trigger is set to Plug-
in Detection.
•
A/V Output is set to While Projecting
in the projector's Signal I/O menu.
•
USB Power is set to On While
Projecting.
•
Auto Power On is set to O in the
projector's Network menu.
s Network > Transmitter Settings >
Auto Power On
Port Wired LAN
Wire
less LAN
Sets the port to use while the Standby
Mode setting is set to Communication
On.
Startup Source Various input
sour
ces available
Select the image source you want to
project when the projector is turned on
in Content Playback mode.
Projector Feature Settings - Operation Menu
201
To Next Page
Loading...
