Epson EB-810E - Page 202

Setting Options Description
Quick Startup 20min.
60min.
90min.
Unlimi
ted
O
Sets the time period for Quick Startup
mode. e projector enters this mode
when you turn it o. You can start
projecting in approximately 5 seconds by
pressing the power button.
However, it may take longer to become
ready for use in the following situations:
•
When projecting from the projector's
USB port
•
When projecting using the Screen
Mirroring features
Setting is only displayed in the following
cases:
•
Auto Power On is set to HDMI1 and
Power On Trigger is set to Plug-in
Detection.
•
A/V Output is set to While Projecting
in the projector's Signal I/O menu.
•
Auto Power On is set to O in the
projector's Network menu.
s Network > Transmitter Settings >
Auto Power On
Setting Options Description
USB Power On While
Pro
jecting
Always On
Set to Always On to continue supplying
power to the streaming media player
when the projector is not projecting
images.
Setting is only displayed in the following
cases:
•
Auto Power On is set to HDMI1 and
Power On Trigger is set to Plug-in
Detection.
•
A/V Output is set to While Projecting
in the projector's Signal I/O menu.
•
Auto Power On is set to O in the
projector's Network menu.
s Network > Transmitter Settings >
Auto Power On
When set to Always On, the standby
power increases.
Indicators On
O
Set to O to turn o the indicator lights
on t
he projector except when an error or
warning occurs.
Inv Direction
But
ton
On
O
When suspending the projector from a
ceiling, set to On to invert the operation
direction of the control panel arrow
buttons.
Content Playback On
O
Set to On to play back a playlist.
Projector Feature Settings - Operation Menu
202