ETC Element - About Managing Show Files

58 Eos Family v2.9.0 Operations Manual
From the configuration window, you can select the target type of scene, and the scene number.
Only one scene can be assigned at a time.
From the command line, you can select a scene, such as [Cue] [1] {Attributes} {Scene} [1]
[Enter]. Then double click on a direct select to assign the selection.
Selecting Channels with Direct Selects
Channel direct selects are highlighted when selected. Channel selection from the direct selects
is an additive process, if channels 1 through 5 are selected, pressing {Channel 6} adds channel 6
to the selection, leaving channels 1 through 5 also selected. Pressing {Channel 6} again will
deselect the channel.
If you have labeled channels in patch, those labels will be displayed above the channel number
when viewing channels in the direct selects.
•
{Channel 1} - adds channel 1 to currently selected channels, if not currently selected.
•
{Channel 1} {Channel 10} - adds channels 1 and 10 to currently selected channels.
•
{Page q} - pages direct selects down by one page.
•
{Page p}- pages direct selects up by one page.
Direct Selects in Flexi Mode
Direct selects can be placed into a flexi mode, which will remove empty tiles. {Use Flexi} needs
to be enabled in the Direct Selects configuration menu. See Direct Selects Configuration Menu
(on page54) .
When enabled, the {Flexi} button will display in the direct selects display.
When in flexi mode, the {Flexi} button will be outlined in gold.