54 Eos Family v2.9.0 Operations Manual
Snapshots - red
Magic Sheets - magenta
Scenes - green
Custom - light gray
If there are more items than can be viewed at once, you may view subsequent pages by using
the page touchbuttons ({p}, {q}) by the direct selects. Hold a page button down and type a
number to jump to a specific direct select.
When storing to direct selects (groups, palettes, presets, and so on), you may store directly to
them by pressing [Record] {Direct Select Key}.
When the direct select is chosen and on the command line, it will have a gold border around it.
If content is available for selected channels, the tile is highlighted. An unrecorded direct select
will have a dark background with dark gray text.
Note: To adjust the brightness of the direct selects, use the Color Brightness fader in
Setup. When the fader is set to 0, the color coding is removed. See Direct Selects
Brightness (on page145) for more information.
You can record decimal inserts to a direct select ({Group 7.1}, {Color Palette 15.5}, {Preset
6.94}, and so on). Use the {Increment} setting in the
Direct Selects Configuration Menu (below)
to set how the numbers will display.
Example:
Assume you have stored color palette 1 (button 1), color palette 1.1 (button 2), and
color palette 3 (button 3). If you record color palette 2, it will appear in the slot just
after color palette 1.1 and color palette 3 will be bumped one slot to the right. This will
continue until an open slot can absorb the displaced target.
To change the direct select type, press the {Select} button. See
Direct Selects Configuration
Menu (below)
for more information about the {Select} button.
Direct Selects Configuration Menu
You have considerable flexibility in how you organize the direct selects by using the options in
the configuration menu.
To access the configuration menu, right click or tap on the direct select's tab to see the
configuration menu.
To Next Page
Loading...
