ETC Element - Page 67

System Basics 55
The following options are available:
•
# of Banks - sets the number of direct select banks that will display.
Layout
•
25, 50, 100, 200 - allows you to select the number of buttons that will display per bank.
•
Rows - allows you to select the number of rows in the banks.
•
Columns - allows you to select the number of columns in the banks.
Control Buttons
•
Control Button Position - allows you to set if the control buttons will display on the left side
or the right side of the banks.
•
Use Record - displays the {Record} button. The {Record} button posts Record to the
command line.
•
Use Select - displays the {Select} button. The {Select} button will display the selected
direct select type. Pressing it will allow you to select a different direct select type.
•
Use Flexi - displays the {Flexi} button. See Direct Selects in Flexi Mode (on page58)
•
Use Expand - displays the {Expand} button.
•
Use Arrows - displays the page up and down arrows.
•
Use Millennial Buttons - displays the century and millennial buttons. These buttons allow
you to jump to pages in the hundreds and thousands.
•
{Page} - displays the selected page of direct selects.
Other
•
Increment - allows you to select if the direct select buttons will display as 1 (whole
numbers), .1 (tens), .01 (hundreds).
•
Skip Empty Flexi Space - will display a vertical bar instead of empty space between a
range of buttons when in Flexi mode.
•
Use Color Swatch - displays a triangular color swatch in the lower left corner of a color
palette direct select.