94
CMS-D3 Central Management Software
To open multiple windows:
• Click an open tab and drag it outside of the main window. A secondary window opens with
the select
ed tab. You may now move that window to a secondary monitor.
Click and drag the tab
outside of the window
R
TIP:
To open additional Live
View tabs, click Control
Panel, then Live View.
This allows you to
monitor different
cameras across
multiple monitors.
Using Sequence Mode
When Sequence Mode is activated, Main View will automatically cycle through pages every
few seconds. You can set Sequence Mode on one or all CMS-D3 windows.
To use Sequence Mode:
1 Click
to open Sequence Mode controls.
2 If you want to use Sequence Mode only on the current window, click Curr
ent Main View. Then,
select Independent for the current window to use a custom switch interval (dwell time) or