70
Remote Viewing Interface
Configuring Recording Parameters
To configure system recording parameters:
1 Click the Remote Setting tab, and then click
Record>Rec Parameters.
The recording schedule is
arranged as a grid. Each row
represents a recording type
(Continuous, Motion, and
Alarm), and each box
represents an hour.
2 Configure the following:
• Channel: Select the channel y
ou wish to configure.
• Record: Select Enable or Disabl
e to start or stop system recording.
• Pack Duration: Sel
ect the duration of each saved file on the system. For example, if you select
15 minutes, then every file will contain 15 minutes of footage.
NOTE: Pack Duration settings are not supported on D3316/D3332. D3316/D3332 packages video
fil
es into files of a maximum size of 255MB.
• Pre-record: Select whether to enable or disable pre-recording.
3 Click
Save
to apply your settings.
Configuring the Recording Schedule
To configure the recording schedule:
1 Click the Remote Setting tab, and then click
Record>Schedule.
2 Configure the f
ollowing:
• Channel: Select the channel y
ou wish to configure.
• Week: Sel
ect the day of the week you would like to apply the settings to.
To Next Page
Loading...
Need help?
General
