27
Playback and Backup
video.
NOTE: Zoom is only av
ailable when a single channel is selected for Playback.
To use zoom in playback mode:
1 Open Playback mode with only one channel sel
ected. For details, see “Playing Back Recorded
Video” on page 23.
2 Click
to open Zoom.
NOTE: Playback contr
ols are not available when Zoom is activated. If you want to pause the
video before you zoom, you will have to pause it before entering Zoom.
3 Click and drag on the ar
ea of the screen you would like to enlarge. The image zooms in on the
selected area.
Zoom icon
Click and drag to
zoom in on an
area
Click and drag inside the box to move the zoom area
Right-click to exit and select a different zoom area
• The box in the lower right-hand corner shows the entire camera picture with a black box
around the zoomed-in area.
• Click inside the box and drag to move the zoom area.
4 Right-click to e
xit and select a different zoom area. Right-click again to exit Zoom Mode and
return to Playback Mode.
Using Video Clip Backup
Video clip backup allows you to select a duration of video during playback mode and save
it to a USB flash drive (not included) or eSATA external hard drive (not included).
NOTE: You must format an eSATA hard drive before you can use it to backup data. For information
on f
ormatting backup drives, see “Device” on page 47.
NOTE: Video clip backup is only av
ailable when a single channel is selected for Playback.
To create a backup video clip:
1 Connect a USB flash drive (not included) or eSA
TA external hard drive to the DVR.
2 Open Playback mode with only one channel selected. For details, see “Playing Back Recorded
Video” on page 23.
To Next Page
Loading...
Need help?
General
