82
Remote Viewing Interface
• Send Email: Select the checkbox to enable email notifications. Email notification must be
enabled.
• Alarm Out: Enable or disabl
e the alarm out panel.
• Latch Time: Configure the sys
tem latch time after an event occurs.
3 Click Save
to save changes.
Configuring Auto-Reboot
Auto-reboot allows the system to restart automatically at a set time or date. This improves
system stability.
To configure Auto Maintain:
1 Click the Remote Setting tab, and click Advanc
e>Maintain.
2 Click the Auto Reboot drop-down menu, and select Enable or Disable to activate or
deactivate the auto-reboot feature.
3 Under Reboot, select ho
w often you want the system to reboot and the time you want the
system to reboot.
4 Click Save
to apply your settings.
To Next Page
Loading...
