FLIR D3200 Series - Installing CMS-D3; Adding Dvrs; Adding a DVR from the Local Area Network (LAN)

84
CMS-D3 Central Management Software
Installing CMS-D3
To install CMS-D3:
• Download CMS-D3 for free from www.flir
security.com/pro. Extract the setup file and then
double-click it.
NOTE: You may receive installation warnings. This is normal. Accept the security warnings to
c
ontinue.
1 Follow the on-screen instructions to install the software.
2 Click
Finish to launch CMS-D3.
Click Finish
3 Click Login to login to the software. By default, a password is not required to log into CMS-D3.
Click Login
NOTE: To open CMS-D3 from the desktop, double-click the CMS-D3 icon ( ).
Adding DVRs
Adding a DVR from the local area network (LAN)
Once you open CMS-D3, you can add a DVR.
Prerequisites:
• DVR must have access to the local area network (LAN).