FLIR D3200 Series User Manual

74
Remote Viewing Interface
Configuring DDNS Settings
To configure DDNS settings:
1 Click the Remote Setting tab, and click
DDNS.
2 Configure the following:
• DDNS: Select
Enable or Disable.
• In the Server dr
op-down menu, select FLIRDDNS.
• Domain Name: Enter y
our Domain name/URL Request from the confirmation email that was
sent after you created your DDNS account.
• User name: Enter y
our DDNS User Name that was emailed to you after DDNS registration.
• Password: Ent
er your DDNS Device password that was emailed to you after DDNS registration.
3 Click Save
to apply your settings.
Configuring Motion Detection Settings
To configure motion settings:
1 Click the Remote Setting, and click Alarm>Motion.
2 Configure the f
ollowing motion recording parameters:
• Channel: Select the channel y
ou wish to apply the settings to.
• Enable: Select this checkbox to enable motion recording.
• Sensitivity
: Select the desir
ed motion detection sensitivity. The greater the value, the greater
the motion sensitivity.

FLIR D3200 Series Specifications

General

Brand	FLIR
Model	D3200 Series
Category	DVR
Language	English