35
Using the Main Menu
Display
The display menu allows
you to configure camera
image settings and video
output settings.
Tip: If you want to apply settings to all
channels, use the "Copy To" drop-down
menu, and select All. Click the Copy
button to copy the setting across all
channels.
Configuring Custom Channel
Names
1 Select the Live tab.
2 In the Channel drop-down menu, select
the channel that you wish to rename.
Channel drop-down menu
3 Click the Name field. Use the Virtual
Keyboard to enter in the new channel
name.
4 Click Apply
to save your settings.
Changing the Position of the
Channel Name
1 Select the Live tab.
2 In the Channel drop-down menu, select
the channel you would like to configure.
3 In the Position
drop-down menu, select
where you would like the channel names
to appear:
• U-L: Upper l
eft hand c
orner.
• D-L: Lower left hand corner.
•
U-R: Upper right hand corner
.
• D-R: Lower right hand corner.
•
OFF: Do not display the channel name.
4 (Optional) Use the drop-do
wns next to
Copy to copy settings to another channel
or all channels. Click the Copy button to
copy settings.
5 Click Appl
y
to save your settings.
Adjusting Camera Color Settings
1 Select the Live tab.
2 In the Channel drop-down menu, select
the channel that you wish to configure.
3 Click the Setup button ne
xt to Color. The
Color Setup window opens.
4 Drag the sliders to adjust the Hue,
Brightness, Contrast, and Saturation.
5 Click Apply
to save your settings.
Enabling Covert Recording
Covert Recording blanks out the screen
so that it seems as if the system is not
recording. Covert channels are only
visible when the admin account logs in
using a remote computer or mobile
device.
To enable covert recording:
1 Sel
ect the Live tab.
2 In the Channel drop-do
wn menu, select
the channel you wish to hide.
3 In the Cov
ert drop-down menu, select
Enable.
To Next Page
Loading...
