53
Setting up your DVR for Remote Connectivity
Setting up your DVR for Remote Connectivity
The system features the following PC/Mac remote connectivity options for connecting over
a LAN or the Internet:
• A PC Client Software to access a single system.
• Built-in browser-based software for Internet Explorer
®
(PC) or Safari
®
(Mac).
• CMS-D3, a multi-site CMS application for PC and Mac (for details, see “CMS-D3 Central
Management Software” on page 83).
Remote Viewing Client
For details on navigating the remote viewing interface,
see “Remote Viewing Interface” on page 60.
System Requirements
Prior to using FLIR Client 1, make sure your system meets or exceeds the following system
requirements:
Description Requirement
CPU
Pentium
®
4 or above
Operating
System
Windows XP/Vista/7/8
Mac OSX 10.6.6 and above (Intel processors only)**
Memory 256 MB RAM or greater
Video 16 MB of video memory
Network (LAN) 10/100 BaseT Network
Network (WAN) 384 Kbps upstream*
*High-speed Internet service is recommended when using DVR Netviewer.
Browser Internet Explorer 7 or later (PC) / Safari 6.0 and above** (Mac)
NOTE: If a user connects to the system remotely, there may be slow performance when
accessing the system locally. This is normal, and not a malfunction.
** For the latest compatibility list, check www.flirsecurity.com/pro/prowww.flirsecurity.com/pro/pro, as
new software versions are released to the market.
To Next Page
Loading...
Need help?
General
