FLIR D3200 Series - Local DVR PTZ Menu Usage; PTZ Presets and Cruise Configuration

21
Setting the Date and Time
Using a NTP Server to set your System Time
A NTP (Network Time Protocol) server syncs your system time with an online time server.
NOTE: A constant Internet connection is required to use the NTP feature.
To enable NTP:
1 Right-click to open the Menu Bar and click the Main Menu butt
on ( ).
2 Click System. Beside NTP, click Setup.
NTP Setup
3 Configure the following:
• Enable: Select
Enable.
• Server Address: Select the NTP serv
er address.
• Time Zone: Select y
our region’s time zone.
Select Enable
Select NTP server
Select your Time Zone
Click Update Now to connect
to the server
Click Apply to save your settings
4 Click Update Now to connect to the time server.
5 Click Apply to sav
e your settings.