FLIR D3200 Series User Manual

76
Remote Viewing Interface
system record motion events, enable motion recording in the recording calendar (Remote
Setting tab>Record>Schedule).
Configuring Alarm Notifications
Configure the settings for alarm devices (not included).
To configure alarm notifications:
1 Click the Remote Setting tab, and click
Alarm>Alarm.
2 Configure the following:
• Alarm In: Select the channel that y
ou wish to configure.
• Alarm Type: Select the alarm type N/O (normally open), N/C (normally closed), or select OFF.
•
Buzzer: Select the "beep" dur
ation when an event occurs.
• Latch Time: Select the desir
ed latch time when an alarm triggers.
• Show Message: Select the checkbox so that the system displays a warning message during
an alarm r
ecording.
• Send email: Select the checkbo
x for the system to send out email alerts during alarm
recording.
• Full Screen: Select the checkbox to enable the system to go into Full-screen View when an
alarm trigger
s.
• Alarm out: Select the checkbo
x to enable alarm out devices to activate.
• Enable Record: Select the checkbox to enable system recording when an alarm triggers.
•
Post Recording: Select the desired post recording time after an alarm triggers.
• Record Channel: Sel
ect the channels that the system should record during an alarm trigger.
3 Click Save
to apply your settings.

FLIR D3200 Series Specifications

General

Brand	FLIR
Model	D3200 Series
Category	DVR
Language	English