96
CMS-D3 Central Management Software
To control PTZ cameras:
1 In Main View, hold the mouse o
ver the PTZ camera to open the Camera Toolbar. Click to
open PTZ controls.
Open PTZ controls
PTZ Controls
Use the arrows to control
the camera’s position
Set PTZ speed
Configure/call presets
Start/stop PTZ cruise
Adjust zoom level
Adjust focus
Adjust iris
Using PTZ Presets
Click to access
Preset controls
Select preset number
Set camera position
Goto preset
Save selected preset as current position
Delete selected preset
Using PTZ Cruise
When PTZ cruise is enabled, the camera will cycle through saved presets. You must save
presets to use PTZ cruise.
To Next Page
Loading...
