73
Remote Viewing Interface
• Resolution: Select the desired recording resolution.
• FPS (Framerate): Sel
ect the desired recording frame rate. Note that higher frame rates
require greater bandwidth consumption during remote viewing.
• Bit Rate: Select the desir
ed video bit rate.
• Audio: Select whether y
ou want the system to record audio (audio cameras required, not
included).
3 Click Save
to apply your settings.
Configuring Email Notification Settings
To configure email notification settings:
1
Click the Remote Setting tab, and click Network> Email.
2 In the Email drop-do
wn menu, select Enable.
3 Configure the f
ollowing:
• SSL: Sel
ect ON/OFF to enable/disable Secure Socket Layer protocol.
• SMTP Port: Enter your SMTP address.
•
SMTP Server
: Enter your SMTP Server.
• Sender Email: Enter the sender email addr
ess. This can be any address of your choice.
• Sender Password: Enter your email server’s password.
•
Receiver Email: Enter the recipient’s email address.
•
Interval: Enter the interval the DVR waits before sending a new email notification.
4 Click
Save
to save your settings.
To Next Page
Loading...
