38
Using the Main Menu
• Click on the edge of a privacy area and
drag to resize a privacy area.
• Right-click when you are finished to exit.
5 (Optional) Use the drop-do
wns next to
Copy to copy privacy areas to another
channel or all channels. Click the Copy
button to copy privacy areas.
6 Click Apply t
o sav
e your settings.
Creating a Custom Split-screen
Display
You can create a custom split-screen
display and re-arrange where channels
are placed.
TIP: You can use the steps below to
create a custom split-screen display on
a secondary monitor connected to the
Video Out (Main on D3316/D3332) port.
First, move the mouse and system
interface to the Video Out monitor by
pressing 0 three times on the remote
control. Complete the steps, and then
press 0 three times on the remote
control again to return the mouse and
system interface to the VGA or HDMI
monitor. Your custom display will be
saved on the secondary monitor.
To re-arrange the split-screen display:
1 Sel
ect the Output tab.
2 Under View Setup, sel
ect Enable. This lets
you select and arrange the channels you
want to show on the screen.
NOTE: Enabling View Setup disabl
es your
ability to change channels the
normal way on the selected monitor.
You will need to disable View Setup
to return to normal operation.
Select Enable
Select display mode
Click Vout Setup
3 Under View Mode, select the desired
viewing mode: Single, Quad, Nine, or
Sixteen.
4 Click Vout Setup. A menu appears that
all
ows you to select the arrangement of
channels.
5 Click the drop-do
wn menus to select
which channels to show on the screen and
the arrangement of channels.
Select the arrangement of channels on screen
6 Click Apply to save changes. Click Ok.
Right-click repeatedly to exit all menus
and return to live viewing.
To Next Page
Loading...
Need help?
General
